您好,欢迎光临济南泉谊机械科技有限公司网站!

服务热线

李经理13695310799
热门搜索:军事模型 航天模型 飞机模型 坦克模型 变形金刚模型 钢雕模型
您当前所在位置 首页>>新闻动态>>常见问题汽车模型保养要注意哪些?

汽车模型保养要注意哪些?

发布时间:2021-03-10 来源:http://www.quanyimoxing.com/

摆放时注意防尘

Pay attention to dust prevention when placing

摆放时应注意防尘,不要随意将汽车模型摆放在办公桌或一般的台面上,而应该套一个有机玻璃罩,防止灰尘进入车模。如果经济许可,购买可接续组合的模型专用万品框,防尘兼防潮,十分好用。“或者将车模放置在玻璃柜内,接触车模时应戴上手套,防止酸性的汗液腐蚀车漆。”车模收藏爱好者茹峰提醒说。

Pay attention to dust prevention when placing the car model. Don't put the car model on the desk or general table, but cover it with a plexiglass cover to prevent dust from entering the car model. If the economy permits, the purchase can be connected to the combination of the model dedicated wanpin frame, dust and moisture-proof, very easy to use. "Or put the car model in the glass cabinet, and wear gloves when touching the car model to prevent the acid sweat from corroding the car paint." Ru Feng, a car model collector, reminds us.

别忽视漆面打蜡

Don't neglect the wax on the paint

高端汽车模型的漆面几乎都采用与真车一样的烤漆,因此,对车模漆面的保养也是不容忽视的。保养车模漆面时,可以用碧丽珠把眼镜布湿润后擦拭车漆。如果需要进一步保养时,也可以用非常细腻的水蜡擦拭车身,这样不仅可以养护车漆,还不容易落灰。另外,需要注意的是,每次打蜡的时候蜡不能太多,而且要注意车模的缝隙,不能将蜡滴到缝隙里。

2-210310162610136.jpg

The paint surface of high-end car models almost adopts the same baking paint as the real car. Therefore, the maintenance of the paint surface of car models can not be ignored. When maintaining the car model paint surface, you can use BILIZHU to wet the eyeglass cloth and then wipe the car paint. If you need further maintenance, you can also use a very delicate wax to wipe the car body, which not only can maintain the car paint, but also is not easy to fall ash. In addition, it should be noted that the wax should not be too much each time, and pay attention to the gap of the car model, and the wax should not drop into the gap.

用干燥剂保持干燥

Keep dry with desiccant

摆放汽车模型的柜子要保持一定的湿度,不能太干燥,也不能太潮湿。另外还需要注意的是,不要用射灯长时间照在模型上面,这样产生的高温就不会使车轮和塑料配件变形。反过来,如果环境过于潮湿,可以用干燥剂保持柜内的干燥度。

The cabinet where the car model is placed should keep a certain humidity, not too dry or too wet. In addition, it should be noted that do not use spotlights to shine on the model for a long time, so that the high temperature will not deform the wheels and plastic parts. Conversely, if the environment is too humid, desiccant can be used to keep the cabinet dry.


-