您好,欢迎光临济南泉谊机械科技有限公司网站!

全国统一服务热线

400-6681-889 李经理13695310799 余经理13864006038
热门搜索:军事模型 航天模型 飞机模型 坦克模型 变形金刚模型 钢雕模型
您当前所在位置 首页>>新闻动态>>常见问题>>舰船模型制作出来后怎么保养?

舰船模型制作出来后怎么保养?

发布时间:2022-08-19 来源:http://www.quanyimoxing.com/

大型舰船模型是很精致的一种模型,一不小心就可能损坏了,那么舰船模型制作出来后怎么保养呢?小编浅谈模型保养五关键。
The large-scale ship model is a very delicate model. It may be damaged if you are not careful. How can you maintain the ship model after it is made? Editor: talking about the five keys of model maintenance.
1,不能让模型暴露在户外,因为模型制造资料约束,如果是长时间让模型暴露在户外的话,很简单形成模型变形,不仅如此,更能使得模型原料发生变化,到时候,模型也就报废了。
1. The model cannot be exposed outdoors because of the constraints of the model manufacturing materials. If the model is exposed outdoors for a long time, it is very easy to form the model deformation. Not only that, but also the model raw materials can be changed. At that time, the model will be scrapped.
2,防止人为的损坏。处于各个方面的原因,在户外不加以防护的话,很简单形成模型遭到人为的损坏和维护。
2. Prevent artificial damage. For various reasons, if the model is not protected outdoors, it will be easily damaged and maintained by people.
3,适当的运用资料继续进行维护。这儿的资料和东西主要是让那些模型不至于遭到危害的资料,不仅如此,还要时间坚持修建舰船模型的原貌,定期清理,而这些作业都需求的模型公司进行的.
3. Properly use the data to continue maintenance. The data and things here are mainly the data to prevent the models from being damaged. Moreover, it is necessary to persist in building the original appearance of the ship models and regularly clean them. These operations need to be carried out by professional model companies
大型舰船模型
4,舰船模型外壳上的氧化物定期清理,才能长期保存
4. The oxide on the shell of the ship model can be cleaned regularly for long-term storage
5,动态类模型运输好的航空箱打包,模型底座表面的灰尘请勿用酒精之类的擦涂。
5. The dynamic model shall be transported in professional air boxes. The dust on the surface of the model base shall not be wiped with alcohol or the like.
此外对于相关的机械模型而言,气管损坏进行更换,要对机械模型几个重要零部件进行跟踪检测:
In addition, for the relevant mechanical model, the air pipe is damaged and replaced, and several important parts of the mechanical model shall be tracked and inspected:
介绍顶出、导向部件的作用是确保模型开合运动及塑件顶出,若机械模型其中任何部位因损伤而卡住,将导致停产,故应经常保持模型顶针、导柱的润滑,并定期检查顶针、导柱等是否发生变形及表面损伤,一经发现,要及时更换;
The function of ejector and guide parts is to ensure the opening and closing movement of the model and the ejection of the plastic parts. If any part of the mechanical model is stuck due to damage, it will lead to shutdown. Therefore, the lubrication of the ejector pin and guide column of the model should be maintained regularly, and the ejector pin and guide column should be regularly checked for deformation and surface damage. Once found, it should be replaced in time;
完成一个生产周期之后,要对机械模型工作表面、运动、导向部件涂覆的防锈油,尤应重视对带有齿轮、齿条模型轴承部位和弹簧机械模型的弹力强度的保护,以确保其始终处于好的工作状态。
After completing a production cycle, the working surface, movement and guide parts of the mechanical model shall be coated with professional anti rust oil, and special attention shall be paid to the protection of the elastic strength of the bearing parts of the gear and rack model and the spring mechanical model to ensure that it is always in a good working state.
随着生产时间持续,冷却道易沉积水垢、锈蚀、淤泥及水藻等,使冷却流道截面变小,冷却通道变窄,大大降低冷却液与模型之间的热交换率,增加企业生产成本,因此对流道的清理应引起重视。更多相关的内容就来我们网站http://www.quanyimoxing.com咨询了解吧。
With the continuous production time, scale, rust, sludge and algae are easily deposited in the cooling channel, which makes the section of the cooling channel smaller and the cooling channel narrower, greatly reducing the heat exchange rate between the cooling liquid and the model and increasing the production cost of the enterprise. Therefore, attention should be paid to the cleaning of the channel. For more information, please visit our website http://www.quanyimoxing.com Consult and understand.
-